Freecom-technologies Storage Gateway NETWORK HARD DRIVE Bedienungsanleitung PDF herunterladen (Seite 91)

Mac OS X: Installing a USB printer

To install a USB printer, connect the printer to one of the USB host ports on the FSG.

Check to make sure the FSG is on. Then turn the printer on.

1. Connect a USB printer to the FSG.

2. Open the FSG Configuration page and check whether the printer was detected

under 'Information' -> 'USB'.

3. Open 'System preferences' -> 'Printing & Faxing'.

4. Click '+' to add a new printer.

5. The 'Printer Browser' opens. Select 'IP printer' as the printer type and select the

following settings:

Protocol: HP Jet Direct-Socket

Address: 192.168.1.1:9100 (replace 192.168.1.1 with the IP address that

you set for your FSG)

Queue name: You may leave this field blank.

A list of available printer drivers is now compiled.

Setting up a printer

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 128 129

Keine Kommentare

Freecom-technologies Storage Gateway NETWORK HARD DRIVE Bedienungsanleitung Seite 91